| Age | Commit message (Collapse) | Author |
|---|
|
machine
COM/tty numbers aren't stable across machines or replugs. Devices now save
their USB serial number and OS description alongside the port; on profile
load, if the saved port isn't present, ArduinoLayer.find_port_by_identity()
looks for a match and remaps it. Falls back to the saved port (device shows
ERROR) if nothing matches.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
|
|
- Removed log file and plugin enabled states.
- Updated esp32_stringPot.ino: added time delay for config screen
and group declaration together.
|
|
Devices: auto-name from OS-reported port description (Device Manager /
udev string) instead of a generic label; default Serial #Channels 1;
consistent simulate-mode checkbox across backends; inline device rename.
Channels: calibration/filters move out of Signals into a Channel
"Operation" (adds Scale/Offset alongside the existing math kinds);
single-physical-source Channels get an embedded Filters block; new
Channels auto-name/auto-ID from their source and reject duplicate
names/IDs on apply; "Create Channel" button on each Signal row; renamed
"Sources" -> "Signals" in the Channels UI; Signals' READ/WRITE dir badge
(was silently-broken IN/OUT) now reflects the real writable flag.
Plot: default layout is one pane per Channel (not per device, not raw
Signals) titled by channel name; "+ Add Channel" is a checkbox dialog
instead of an inline dropdown; traces get up/down reorder; live unit
changes (e.g. a Mark-10 gauge switching lb/kgF/N/ozF) propagate to an
open pane's axis label without clobbering a manually-typed one.
Control Panel: hardware assignment now picks from the same writable-
Signals list instead of a separate device/channel combo with a
hardcoded Arduino pin list; stale visual indicator when a control's
target device/channel disconnects or disappears; documented the `vars`
bridge (Control Panel On Action Script <-> Channel scripts) in both
directions' help text and script templates.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
|
|
|
|
- Moved arduino file to sub-directory.
- Updated esp32_stringPot low-pass filter from EMA to butterwoth.
|
|
- Renamed and moved arduino firmware into it's own sketch for arduino
compiling interface.
- Added esp32 firmware for stringpotentiometer.
|
|
amp+offset spanned the full [0,5] clamp range edge-to-edge, so
per-sample noise pushed past the rails on every peak/trough and got
hard-clamped into a flat plateau. Shrinking amp gives ~8.7 sigma of
headroom so the clamp stays a safety net instead of firing every cycle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
protocol updates
origin/main (23 commits) added a Debug window/log system on top of the old
separate Devices/Channels/Plot windows, plus protocol fixes (cml, mark10,
modbus_rtu, scpi) and device/profile changes. Local main (3 commits)
replaced the separate windows with a unified ConfigWindow + dock panel.
Kept local's ConfigWindow/dock architecture and ported the Debug window
onto it: new toolbar button + _open_debug(), gated by developer_mode same
as origin's version. Deduped the two independent "developer mode" toggles
that had collided in SettingsWindow (origin's General-tab checkbox gating
Debug window + device sim-mode visibility, local's Advanced-tab checkbox
setting verbose logging) into one General-tab checkbox that does both.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
- Added dedicated firmware file for arduino
- Added View button to consolidate windows
- Control Panel changes:
- Changed name fron "Controls" to "Control Panel"
- Blue side bar when Panel is hidden.
- Supports "popping" out contorl panel
- Settings > Advanced tab added with developer settings
|
|
Mark10Layer._parse() already tracked whichever unit suffix the gauge
last reported (lb/kgF/N/ozF — the gauge's physical unit button cycles
these independently of this app). serial_device.py hardcoded the
"force" channel's unit to "N" and never updated it, so switching units
on the gauge itself was invisible here.
Adds Mark10Layer.current_unit and has SerialDevice.read_channels()
keep the "force" ChannelConfig's unit in sync with it on every poll.
This fixes the unit shown in anything that reads ChannelConfig.unit
live — new plots, channel pickers, CSV log headers — but does not
relabel the Y-axis of an already-open plot pane, since plot axis
labels are baked into PlotConfig.y_label once at plot-build time, not
re-read from the channel live. Making an open pane's axis relabel
itself would need new signal plumbing from the device through
AcquisitionEngine to the strip chart — a bigger, separate change.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
motion_capture setting to false
|
|
communication
|
|
|
|
|
|
|
|
|
|
|
|
Including:
- Control panel
- Change status of simulation after devices creation.
- Arduino serial conflict with multiple channels.
- Claude instructions.
- Update to arduino on board code.
|
|
This version contains the profile feature. Allowins users to save the
channels, signals and plots for specific labs.
|
|
|
|
|
|
|
