| Age | Commit message (Collapse) | Author |
|---|
|
# Conflicts:
# ui/control_editor.py
|
|
|
|
|
|
New Settings > General > "Developer mode" checkbox (default on, so
this repo's simulate-by-default workflow is unaffected out of the box)
persisted through the existing core/app_settings.py load/save
functions. Exposed to code that can't easily receive the settings dict
via core.app_settings.is_developer_mode()/set_developer_mode(), a
small in-memory cache MainWindow keeps in sync whenever settings are
loaded or applied.
Debug window (ui/windows/debug_window.py): minimal first pass per the
plan — a live console. core/debug_log.py tees stdout/stderr into a
ring buffer + Qt signal (installed once in main.py, before anything
prints), so the window shows everything printed since app start,
including from background poll threads, not just what's printed while
it happens to be open. Its toolbar button is hidden unless developer
mode is on.
Simulate gating: every device's Simulation Mode checkbox/dropdown is
now hidden when developer mode is off — ui/add_device_dialog.py (also
covers the motion_capture camera panel, which shares this same
checkbox rather than having its own), and the per-device config
widgets in analog_input.py, arduino_device.py, digital_io.py,
nidaqmx_device.py, serial_device.py. Hiding rather than force-clearing
an already-simulating device's state — an existing simulated device
keeps working if developer mode is turned off later; the option is
just not offered again until it's back on.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Mark10Layer._parse() already tracked whichever unit suffix the gauge
last reported (lb/kgF/N/ozF — the gauge's physical unit button cycles
these independently of this app). serial_device.py hardcoded the
"force" channel's unit to "N" and never updated it, so switching units
on the gauge itself was invisible here.
Adds Mark10Layer.current_unit and has SerialDevice.read_channels()
keep the "force" ChannelConfig's unit in sync with it on every poll.
This fixes the unit shown in anything that reads ChannelConfig.unit
live — new plots, channel pickers, CSV log headers — but does not
relabel the Y-axis of an already-open plot pane, since plot axis
labels are baked into PlotConfig.y_label once at plot-build time, not
re-read from the channel live. Making an open pane's axis relabel
itself would need new signal plumbing from the device through
AcquisitionEngine to the strip chart — a bigger, separate change.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
DeviceInfo.name existed but was hardcoded per device type and never
operator-editable. Adds a Display Name field to Add Device and makes
the Info-tab Name field in the device config dialog editable, and
threads the name through get_save_config()/ProfileManager.apply() so
a custom name survives a .labdaq save/reload instead of reverting to
the type default. Name is applied post-construction rather than as a
constructor kwarg, since no device factory declares a "name" param.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Adds ChannelConfig.writable so the Controls editor can only bind to
channels with a real write mapping (VS/MA/ME/MD/ST for CML, do*/DO for
digital I/O, write_cmd-configured SCPI channels, holding-register Modbus
channels) instead of read-only telemetry — this is exactly the class of
mistake hit earlier (binding a motor-speed control to M1_TV instead of
M1_VS). Also carries forward the enabled-channel gating for controls
(hide disabled channels from the picker, block writes to them at
_write() time) done alongside this investigation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
motion_capture setting to false
|
|
communication
|
|
|
|
|
|
Naming conventions:
- Devices window: "Channel ID" column → "Signal ID"
- Serial device auto-gen IDs: CH# → sig# (generic, SCPI, Modbus fallbacks)
- Channels window physical section: "Physical Channels" → "Signals"
- Channels window virtual section: "Virtual Channels" → "Channels"
- "Add Virtual" button → "Add Channel"
- New derived channel default name: "Virtual Channel #" → "Channel #"
Signals panel (ChannelPipelineBlock):
- Remove Calibrate header button; add inline Calibration section in body
- Remove Math section (Derivative/Integral) entirely
- scale_offset excluded from filter dropdown; routed to Calibration section
- Existing pipelines: scale_offset loads into Calibration, math filters dropped
- _FILTER_KEYS excludes derivative, integral, scale_offset
Splitter default position:
- Left (Signals) pane initialised to minimum content width via QTimer.singleShot
- setStretchFactor(0,0) / (1,1): left stays narrow, right grows on resize
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Add Device dialog:
- Replace Available Devices QGroupBox with plain devWindowTitle label
to match Configuration section style — no box/border
- Auto-scan on open via QTimer.singleShot(0)
- Rename Scan All → Refresh
Serial config widget:
- Fix gap between protocol panel and Available Serial Ports: introduce
_AdaptiveStack (QStackedWidget subclass) that reports only the current
panel's sizeHint; set Fixed vertical size policy so the stack never
expands beyond its content regardless of window size
- Stretch added between Available Serial Ports and Apply & Reconnect so
the button stays pinned to the bottom
- Rename Channels → Signals in _GenericPanel and _SCPIPanel (Signal Queries)
Config dialog (device info tab):
- Rename Channels → Signals
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
|
|
|
|
|
|
|
