| Age | Commit message (Collapse) | Author |
|---|
|
- Buffer size (samples) in Settings > Acquisition was captured into the
settings dict but never read anywhere — SignalBuffer always used the
hardcoded MAX_BUFFER=20_000 constant (which happens to match the
dialog's default, hence it looking like the value "reverts"). Add
AcquisitionEngine.set_buffer_size(), wired in on startup and on Settings
apply; existing buffers are rebuilt at the new size in place, keeping
their most recent samples.
- New "Safety Switch" control type: an On/Off Switch that's disabled
outright until acquisition is running, with a lock icon shown while
disabled. AcquisitionEngine gains a run_state_changed(bool) signal
(emitted from start()/stop()); ControlWidget gains a
_check_safety_lock() hook (no-op by default, called uniformly by
ControlPanel on every widget) that SafetySwitch overrides. engine is
now threaded through to every ControlWidget for this. Persists via
ControlSpec.control_type alone — no schema change needed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Arduino analog Signal ids used to be the pin name itself, so fixing a
wrong pin silently changed the id and orphaned any plot trace, control,
or filter pipeline pointing at it. Analog Signal ids are now positional
(ai0, ai1, ...) and decoupled from the underlying pin, matching how
digital I/O already worked.
More broadly, formalizes a Device -> Signal -> Channel -> Plot naming
model (SignalConfig for physical device channels, Channel for derived/
computed ones) and adds core/reference_registry.py to propagate any
Signal or Channel id rename through plot traces, controls, and filter
pipelines instead of leaving them dangling. Signal ids are now editable
in the Signals tab with the same propagation.
.labui profile schema bumped to v2.0 with a transparent migration for
old files, including remapping old pin-name Signal ids to the new
positional ones. Removed six confirmed-dead files (two legacy device
classes, four superseded top-level ui/ duplicates).
|
|
Root cause of "QFont::setPointSize: Point size <= 0 (-1)" on some
dropdowns: the app never sets an explicit widget style, so it defaults to
native windowsvista, whose popup code calls setPointSize() on fonts
resolved from our QSS's pixel-based font-size (pointSize() is -1 by
design for px fonts). Tried app.setStyle("Fusion") first — silences it,
but Fusion doesn't render buttons/dropdowns to match the QSS the way the
native style does. Kept native style, filtered just that one message via
qInstallMessageHandler instead — it's cosmetic Qt console noise (the
rejected setPointSize call is a no-op, doesn't affect rendering), not a
real bug.
Also adds a handful of tooltips (Control Editor's Check Syntax/Cancel/
Create Control, device Configure dialog's Close, main toolbar's View/
Configure/RUN/LOG/Settings, a few Control Panel widgets) from an
in-progress app-wide tooltip pass, paused partway through by request —
remaining buttons are being done manually.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Devices: auto-name from OS-reported port description (Device Manager /
udev string) instead of a generic label; default Serial #Channels 1;
consistent simulate-mode checkbox across backends; inline device rename.
Channels: calibration/filters move out of Signals into a Channel
"Operation" (adds Scale/Offset alongside the existing math kinds);
single-physical-source Channels get an embedded Filters block; new
Channels auto-name/auto-ID from their source and reject duplicate
names/IDs on apply; "Create Channel" button on each Signal row; renamed
"Sources" -> "Signals" in the Channels UI; Signals' READ/WRITE dir badge
(was silently-broken IN/OUT) now reflects the real writable flag.
Plot: default layout is one pane per Channel (not per device, not raw
Signals) titled by channel name; "+ Add Channel" is a checkbox dialog
instead of an inline dropdown; traces get up/down reorder; live unit
changes (e.g. a Mark-10 gauge switching lb/kgF/N/ozF) propagate to an
open pane's axis label without clobbering a manually-typed one.
Control Panel: hardware assignment now picks from the same writable-
Signals list instead of a separate device/channel combo with a
hardcoded Arduino pin list; stale visual indicator when a control's
target device/channel disconnects or disappears; documented the `vars`
bridge (Control Panel On Action Script <-> Channel scripts) in both
directions' help text and script templates.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
# Conflicts:
# ui/control_editor.py
|
|
Relabel every channel picker/header to "NAME (DEVICE/SIGNAL)" instead of
the previous "DEVICE/SIGNAL (NAME)" ordering, consistently across
channels_window.py (_channel_combo, ChannelPickerDialog,
ChannelPipelineBlock header), plot_builder.py, plot_config.py,
control_editor.py, and plot_window.py.
While touching each of those pickers, added the missing `.enabled`
filter that _make_picker()/_x_cb/_build_channel_picker lacked (the
default-layout builders already filtered disabled channels; these
manual "add channel to pane" pickers didn't).
Devices window Signals tab: removed the separate "Signal ID" column
(folded into the existing non-editable Device column instead of the
editable Name column, to avoid corrupting the in-place channel rename
feature that column already supports).
Channels window Virtual Channels pane: added a "Source" dropdown next
to "+ Add Channel" — picking a source pre-seeds the new derived
channel with it via DerivedBlock._add_src(); leaving it on the default
"none" entry keeps today's behavior of creating an empty channel.
Note: docs/ToDo.md's "Channels window UI" items referred to the *live*
UI (this window's PipelineTab + the Devices window's Signals tab), not
SignalsListTab in this same file, which its own module docstring flags
as dead/unused code kept only for old-profile compatibility — verified
by grepping for any instantiation of it (none exist).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Adds ChannelConfig.writable so the Controls editor can only bind to
channels with a real write mapping (VS/MA/ME/MD/ST for CML, do*/DO for
digital I/O, write_cmd-configured SCPI channels, holding-register Modbus
channels) instead of read-only telemetry — this is exactly the class of
mistake hit earlier (binding a motor-speed control to M1_TV instead of
M1_VS). Also carries forward the enabled-channel gating for controls
(hide disabled channels from the picker, block writes to them at
_write() time) done alongside this investigation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
- Named variables in expressions: source channel IDs injected as Python
identifiers alongside x[] (e.g. write `A0 * 2` instead of `x[0] * 2`)
- Shared `vars` dict on SignalProcessor accessible from all expressions,
functions, and control scripts; persisted in .labdaq profiles
- Per-derived-channel `state` dict for persistent computation state in
custom scripts
- Control widgets gain optional on_action_script (Python snippet with
value, vars, channels, math in scope); syntax-checked in editor dialog
- Built-in derived kinds (derivative, rms, power, etc.) now show their
Python implementation as read-only code previews; "Edit as Custom Script"
converts to custom_script kind with template pre-filled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
|
|
|
|
Including:
- Control panel
- Change status of simulation after devices creation.
- Arduino serial conflict with multiple channels.
- Claude instructions.
- Update to arduino on board code.
|
|
This version contains the profile feature. Allowins users to save the
channels, signals and plots for specific labs.
|
