| Age | Commit message (Collapse) | Author |
|---|
|
Root cause of "QFont::setPointSize: Point size <= 0 (-1)" on some
dropdowns: the app never sets an explicit widget style, so it defaults to
native windowsvista, whose popup code calls setPointSize() on fonts
resolved from our QSS's pixel-based font-size (pointSize() is -1 by
design for px fonts). Tried app.setStyle("Fusion") first — silences it,
but Fusion doesn't render buttons/dropdowns to match the QSS the way the
native style does. Kept native style, filtered just that one message via
qInstallMessageHandler instead — it's cosmetic Qt console noise (the
rejected setPointSize call is a no-op, doesn't affect rendering), not a
real bug.
Also adds a handful of tooltips (Control Editor's Check Syntax/Cancel/
Create Control, device Configure dialog's Close, main toolbar's View/
Configure/RUN/LOG/Settings, a few Control Panel widgets) from an
in-progress app-wide tooltip pass, paused partway through by request —
remaining buttons are being done manually.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Devices: auto-name from OS-reported port description (Device Manager /
udev string) instead of a generic label; default Serial #Channels 1;
consistent simulate-mode checkbox across backends; inline device rename.
Channels: calibration/filters move out of Signals into a Channel
"Operation" (adds Scale/Offset alongside the existing math kinds);
single-physical-source Channels get an embedded Filters block; new
Channels auto-name/auto-ID from their source and reject duplicate
names/IDs on apply; "Create Channel" button on each Signal row; renamed
"Sources" -> "Signals" in the Channels UI; Signals' READ/WRITE dir badge
(was silently-broken IN/OUT) now reflects the real writable flag.
Plot: default layout is one pane per Channel (not per device, not raw
Signals) titled by channel name; "+ Add Channel" is a checkbox dialog
instead of an inline dropdown; traces get up/down reorder; live unit
changes (e.g. a Mark-10 gauge switching lb/kgF/N/ozF) propagate to an
open pane's axis label without clobbering a manually-typed one.
Control Panel: hardware assignment now picks from the same writable-
Signals list instead of a separate device/channel combo with a
hardcoded Arduino pin list; stale visual indicator when a control's
target device/channel disconnects or disappears; documented the `vars`
bridge (Control Panel On Action Script <-> Channel scripts) in both
directions' help text and script templates.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
- Moved edit and X button to top with header of widget.
- Replaced up/down button with drag-and-drop style headers.
|
|
protocol updates
origin/main (23 commits) added a Debug window/log system on top of the old
separate Devices/Channels/Plot windows, plus protocol fixes (cml, mark10,
modbus_rtu, scpi) and device/profile changes. Local main (3 commits)
replaced the separate windows with a unified ConfigWindow + dock panel.
Kept local's ConfigWindow/dock architecture and ported the Debug window
onto it: new toolbar button + _open_debug(), gated by developer_mode same
as origin's version. Deduped the two independent "developer mode" toggles
that had collided in SettingsWindow (origin's General-tab checkbox gating
Debug window + device sim-mode visibility, local's Advanced-tab checkbox
setting verbose logging) into one General-tab checkbox that does both.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
- Added dedicated firmware file for arduino
- Added View button to consolidate windows
- Control Panel changes:
- Changed name fron "Controls" to "Control Panel"
- Blue side bar when Panel is hidden.
- Supports "popping" out contorl panel
- Settings > Advanced tab added with developer settings
|
|
# Conflicts:
# ui/control_editor.py
|
|
Run/Stop previously only paused acquisition — control outputs (motor
speed, switches, PWM duty) kept whatever value was last written, so
stopping the run loop didn't stop a running motor. Adds
ControlWidget.safe_stop() (per-widget override, default zeros the
output) and ControlPanel.safe_stop_all(), called from _toggle_run's
Stop branch before engine.stop().
Per-widget behavior is deliberately not uniform:
- OnOffSwitch/MotorControl/PwmControl have a latched running/enabled
state, so safe_stop() drives their own toggle handler (consistent UI
+ write in one path) and, for Motor/PWM, zeroes the slider too.
- SetpointControl/AnalogOutputControl only write on an explicit user
action and have no universally safe forced value (e.g. 0 isn't
necessarily "off" for an arbitrary process setpoint or analog
output) — Stop leaves them untouched rather than guessing.
Log button: added a :disabled QSS rule so "can't log yet" reads as
clearly inert rather than a duller version of the enabled look, and a
600ms blink (toggling a "recording" dynamic property the QSS keys off)
while a recording is active, so it reads as live/recording rather than
a static pressed button. Master Stop now calls _toggle_log(False)
explicitly when forcing the button off, since QPushButton.setChecked()
doesn't emit clicked — without this the blink would keep running after
a master Stop even though logging itself already halted via
engine.stop()'s internal stop_logging() call.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
Adds ChannelConfig.writable so the Controls editor can only bind to
channels with a real write mapping (VS/MA/ME/MD/ST for CML, do*/DO for
digital I/O, write_cmd-configured SCPI channels, holding-register Modbus
channels) instead of read-only telemetry — this is exactly the class of
mistake hit earlier (binding a motor-speed control to M1_TV instead of
M1_VS). Also carries forward the enabled-channel gating for controls
(hide disabled channels from the picker, block writes to them at
_write() time) done alongside this investigation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
|
|
|
|
- Named variables in expressions: source channel IDs injected as Python
identifiers alongside x[] (e.g. write `A0 * 2` instead of `x[0] * 2`)
- Shared `vars` dict on SignalProcessor accessible from all expressions,
functions, and control scripts; persisted in .labdaq profiles
- Per-derived-channel `state` dict for persistent computation state in
custom scripts
- Control widgets gain optional on_action_script (Python snippet with
value, vars, channels, math in scope); syntax-checked in editor dialog
- Built-in derived kinds (derivative, rms, power, etc.) now show their
Python implementation as read-only code previews; "Edit as Custom Script"
converts to custom_script kind with template pre-filled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
|
|
|
|
This version contains the profile feature. Allowins users to save the
channels, signals and plots for specific labs.
|
|
|
