| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Split zone was unreachable: squeezed between outer squeeze (1/6) and
center (1/3), leaving a 1/6-wide band impossible to target reliably.
Users hitting the tile edge always triggered squeeze instead of split.
- Remove squeeze from inside-tile detection entirely. Split now owns
the outer 1/3 of each tile edge — large, easy to target. Center
keeps the inner 1/3. Squeeze remains gap-detection only (second pass).
- Fix canvas-edge squeeze (no adjacent neighbor): instead of bisecting
the edge tile, wrap the entire remaining tree in a new directional
split with the dragged tile placed at the outer position, then
equalize — all tiles end up equal size.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
- Fix squeeze zone pop-out: _adjacent_tile used self._drag_tile (already
None at drop time) to exclude the dragged tile from neighbor candidates.
Pass dragged_idx explicitly via exclude_idx param instead.
- Swap split/squeeze detection areas: outer 1/6 now triggers squeeze
(insert-between), inner 1/6→1/3 band triggers split (bisect target).
- Extend squeeze detection to gaps between tiles and canvas edges via a
second pass in _zone_at that expands tile rects by _LC_GAP+2 and finds
the closest outside edge. Canvas-edge squeeze falls through to bisect.
- Dynamic canvas height: sync_panes sets height to
max(160, n*(min_tile+gap)+2*gap) so 4+ panes never get crushed below
minimum tile size.
- Remove _tree_grid_size cap of 12: LCM was truncated prematurely,
causing unequal rowspans in the strip chart for 5+ panes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Root cause: PlotWindow deepcopied _chart._cfg on init, so refresh_channels()
operated on a stale copy. Also, when _win_plot was None, _on_derived_changed
did nothing to prepare the config for when it opened.
Fix:
- refresh_channels() now owns the derived-pane sync: adds panes for new
virtual channels (updating BSP tree), removes panes for deleted ones
- _open_plot always passes current _chart._cfg reference then calls
refresh_channels() so derived panes sync on every open
- _on_derived_changed syncs cfg reference before calling refresh_channels()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
_zone_at used absolute pixel distance to pick dominant axis, which always
favoured the short (vertical) axis for landscape tiles. Replaced with
normalized fraction (dist/dimension), so left/right zones are accessible
on wide tiles.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Zone layout (outer to inner per edge):
0–1/6 squeeze (amber): insert dropped tile between two existing tiles
1/6–1/3 split (blue): bisect the target tile 50/50
1/3–2/3 center (green): swap/move
Squeeze behaviour: find the tile adjacent to the target in the drop
direction; insert dragged tile to the opposite side of that neighbor
so it lands visually between them. Falls back to split when no neighbor
exists (edge tile).
- _zone_at: returns "squeeze_*"/"split_*"/"center" with dominant-axis
selection (nearest edge wins)
- _adjacent_tile: finds geometrically adjacent tile by pixel proximity
- _do_drop: routes squeeze→insert-at-neighbor, split→bisect, center→swap
- paintEvent: amber/blue/green per zone type
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
- Edge zones (left/right/top/bottom): split target tile equally
- Center zone: swap dragged and target tile positions in BSP tree
(tree structure preserved, only leaf pane values exchanged)
- Center overlay: green highlight (vs blue for split zones)
- _tree_swap: immutable swap of two leaf pane values
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
After each drag-drop, add, or remove, walk the tree and reset each split's
ratio to left_leaves/(left_leaves+right_leaves). This distributes space
equally per pane regardless of the prior tree structure.
- _tree_equalize_ratios: recomputes all ratios bottom-up by leaf count
- _tree_leaf_count: counts leaves in a subtree
- _tree_grid_size: uses LCM of split denominators (capped at 12) instead
of 2^depth, giving exact integer rowspans for equal distributions
- _tree_default: balanced binary tree + equalize (not uneven chain)
- Applied in _do_drop, _add_pane, _rm
Result: 3 side-by-side panes → equal widths; any mixed layout → equal area.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Dragging a tile to the edge (left/right/top/bottom) of another tile
splits that tile's space and inserts the dragged tile on that side.
Drop zones occupy the outer third of each tile edge; center has no zone.
Ghost overlay shows the split target during drag.
Data model: LayoutConfig.tree (BSP tree as nested dict). PaneSpec.row/col
removed. strip_chart uses tree_to_grid() → rowspan/colspan for pyqtgraph.
Backward compat: tree=None falls back to layout_mode stacking path.
Example: 3 stacked → drag Tile 3 to left of Tile 1 → Tile 3|Tile 1 on
top (side-by-side), Tile 2 spans full bottom.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Replace layout radio buttons (Stacked/Side-by-Side/Grid) with a visual
LayoutCanvas widget. Pane tiles snap to grid cells on drag-drop; dropping
on an occupied cell swaps positions. Ghost highlight shows snap target
during drag.
- PaneSpec gains row/col fields (None = unassigned; backward compat preserved)
- LayoutConfig gains "free" mode; strip_chart reads explicit positions
- PaneBlock loses ▲▼ move buttons; reordering is canvas-only
- QSS entries added for layoutTile, layoutTileDragging, layoutCanvasBar
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
Remove Qt.WindowType.Tool flag — it suppresses the maximize button.
Window now has standard chrome with minimize/maximize/close.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
|
|
|
|
Fixed derived signal saving profile. Renamed Signals>Pipeline to Signas>Channels
and adding/removing channels feature.
|
|
|
